MPPT solar charge controller for 12/24 V battery, with 10 A, display, USB port
Increase your solar panel efficiency easily now: The optimal operating point of solar cells varies with the irradiance and temperature of the sun's rays. Conventional charge controllers cannot compensate for these fluctuations and you miss out on a lot of power! But not so with your new charge controller with Maximum Power Point Tracking, MMPT for short. The charge controller thus ensures that the greatest possible power can be extracted from your solar cells at any time!
Charge batteries particularly efficiently: Use the controller for all solar power systems with a power of up to 10 A. This way, your 12 and 24 V batteries will be up and running again in no time.
Saferthan ever: Thanks to the control system, your batteries are reliably protected against short circuits, incorrect wiring and overcharging. The controller keeps an eye on the charge level and protects against deep discharge. Of course, this also significantly increases the service life of your batteries.
Additional connections for consumers and mobile devices: at the USB port you can charge your smartphone, for example, if required. And at the second screw terminal connection you connect an LED light and more.
- Regulator for constant battery charging current via solar panel (please order separately)
- Supports MMPT (Maximum Power Point Tracking): compensates for fluctuations in the optimal operating point of solar cells, ensuring the greatest possible power at all times
- Charges all commercially available 12 and 24 volt batteries (please order separately)
- Charging capacity at 12 volts: 130 watts, at 24 volts: 260 watts
- Effective protection against overload, short circuit, overvoltage, discharge and polarity reversal
- LCD display for indication of function modes
- USB charging port for smartphone, tablet PC and more: 5 V, up to 1.2 A / 6 watts
- Connectors: Screw terminals for cables with up to 10 mm²
- Working voltage: 12 / 24 V (automatic switching)
- Maximum charging current: 10 A
- Maximum PV open circuit voltage: 100 volts
- Working temperature: -20 to +55 °C
- For relative humidity up to 90
- Connections: Screw terminals for solar panel, battery and working unit
- Dimensions: 156 x 127 x 43 mm, weight: 360 g
- Charge controller MPPT-110 including 6 cable sleeves and German manual